Tackling Methods Of Dogs

dog

The Right Way To Handle Found Dogs

More than 70,000 dogs are admitted every year by the animal shelters affiliated to the German Animal Welfare Association.

Found dogs represent the largest share and everyone has their own story. Some dogs lost masters and mistresses during a common vacation trip.

Other four-legged friends buff from home but cannot find their way back. But no matter what fate is behind it: Anyone who finds an apparently stray dog, can do a lot so that he can be returned to his owner.

“The finder should first look for a potential owner in the area and ask in the neighborhood if the four-legged friends there is known or missing, spokesman for the German Animal Welfare Association.

If this is not the case, you should check whether the animal is marked. Many dogs have tattoos in the ear, inside the thighs, or carry a microchip.

“Veterinarians can read the number stored on such a chip with a special reader. Subsequently, it can be checked that german longhaired pointer is available,  whether the dog was registered in the German pet registry, for example.

The Duties Of FInding A Stray Dog

But what do you have to pay attention to and do, if you find a stray four-legged friend? What obligations do you have if you unexpectedly come to the dog?

The finder must immediately report the find to the responsible founding authority, usually the municipality, He is obliged to deliver the found animal to the local community or to a designated location.”

This means: If you find a dog, it should be delivered to the local shelter. This then informs the responsible founding authority and takes the dog temporarily. In collaboration with a veterinarian, who checks the registration of the four-legged friend in an animal database (for example in the German pet registry), the shelter then tries to identify the owner?

Alternatively, the finder can bring the dog once to a veterinarian. This is particularly useful if the animal has obvious injuries or internal injuries are suspected. The veterinarian can not only perform the necessary examinations and treatments, he can also check if the animal is chipped.

“The treatment costs must basically take over the owner of the animal,” said the speech of the German Animal Welfare Association. “If this cannot be determined, the municipality in whose area the animal was seized is responsible for the reimbursement of costs.”

However, the responsible local authority should always be informed in advance. For those who simply keep a stray dog ​​commits fund mis-appropriation.

If you as Finder have no opportunity to visit a veterinarian or a shelter, the rule is: never leave the dog alone! Instead, you should call the police. The officers will take over the abandoned quadruped and take him to the shelter.

It is definitely worth the effort to look after the animal. According to an experience, over half of the found dogs that are released at the shelter can be returned to their owners.

Proxy (Computer Network)

network proxy

How The Network Proxy Works?

Schematic representation of a proxy (in the middle of the picture), which passes on the data transfer between the two outer computers.

A free web proxy (proxy representative “proxy”, from Latin proxus “next”) is a communication interface in a network. He works as a mediator who receives inquiries on the one hand, and then connects to the other via his own address.

If the proxy is used as a network component, on the one hand the actual address of a communication partner remains hidden from the other communication partner, which creates a certain anonymity.

On the other hand, as a (possible) link between different networks, it can realize a connection between communication partners even if their addresses are incompatible with each other and a direct connection is not possible.

In contrast to a simple address translation (NAT), a proxy server, also called a dedicated proxy, can manage and influence the communication itself, instead of passing the packets through unseen.

Specializing in a specific communication protocol, such as: As HTTP or FTP, he can analyze the data coherently, filter requests and make any adjustments if necessary, but also decide whether and in what form the response of the target to the actual client is passed.

Sometimes it serves to cache certain answers so that they can be retrieved more quickly in the case of recurring requests without having to request them again from the destination.

Working Method And Demarcation

Multiple Dedicated Proxies are often used in parallel on a single device to handle different protocols.

A generic proxy, also called circuit level proxy, is used as a protocol-independent filter on a firewall application.

He realizes there a port- and address-based filter module, which also supports a (possible) authentication for establishing a connection. In addition, it can be used for easy forwarding by listening on one port of a network adapter and passing the data to another network adapter and port.

He can neither see the communication nor lead nor influence the communication, because he does not know the communication protocol.

The Difference To A NAT Device

Technically, a typical proxy operates as a traffic intervening communication partner on the OSI layer 7, terminating the connections on both sides (thus being two separate connections) rather than simply passing the packets through like a NAT device.

Such a Dedicated Proxy is thus a utility for computer networks, which mediates in the traffic, and is therefore also called a proxy server: As an active mediator, it acts like a server to the requesting client and to a client, the other side, the target system,

However, there are overlaps with NAT in the generic Circuit Level Proxy operating on OSI layers 3 and 4, which may use the technique of simple address translation.

Nevertheless, NAT takes a barely noticed role among the proxies. Therefore, it is assumed in the following of the first-described variant, when in general of a (typical) proxy is mentioned.

An Introduction About, How To Use The Sewing Machine?

sewing machines

The sewing machine

The normal household sewing machine belongs to the group of lock stitch sewing machines, i.e. the sewing machine works with 2 threads, a top thread, and a bottom thread.

By entangling the two threads creates a uniform stitch pattern that looks the same on both. On the model, the sewing machine can also sew zigzag, pattern and utility stitches.

To sew, you need a sewing needle, gripper, bobbin case, and bobbin, upper and lower thread, as well as feed dog and thread lever. In principle, all sewing machines, in spite of the different makes and makes, are very similar.

Parts of the sewing machine shown above can be found on almost every sewing machine that can sew straight and zigzag stitches (except for stitch patterns and extension table).

The sewing needle

The sewing machine needle has its eye at the top in contrast to the hand needle. It pierces the fabric with the upper thread. When the needle drops, a loop forms. This loop is caught by the hook tip. Whole thing down again (see graphic so a stitch is created.)

The gripper and bobbin case

The function of the gripper is to grasp the upper thread loop with the hook tip, to widen it and to wrap the upper thread around the quiescent bobbin case.

There are different gripper systems. Depending on the model, these may differ from the illustration.

Known systems include, for example, the CB gripper (pictured above), the rotary gripper, the horizontal gripper and the eyeglass gripper.

Upper and lower thread

Upper and lower thread regulate the thread tension, which is one of the most important, if not the most important factor for a clean stitch pattern. More about thread tension here.

The thread lever

The thread lever releases the required amount of needle thread for the loop. After circumnavigating the thread around the bobbin case, the lever pulls the excess thread back up.

The entanglement of the two threads in the fabric is tightened by the threading lever, in cooperation with the forward-moving feed dog, and then immediately fetches the required amount of thread for the next stitch on the best sewing machine reviews.

Function – How to create a stitch

  • The needle, with the upper thread, penetrates through the fabric into the bobbin area.
  • The upper thread is caught by the gripper. The needle goes up again.
  • The gripper pulls the upper thread, which forms a loop, around the bobbin case.
  • The thread loop slips down from the hook and lies around the bobbin thread.
  • Both threads are tightened upwards. A lock stitch has been created.

The Transporter

The task of the transporter is to transport the fabric to the set stitch length forward or backward. He also presses the fabric layers to firm together while sewing. It is adjusted by the stitch length selector.

The sewing pressure

The sewing pressure is the applied pressure on the fabric. This occurs when it lies under the presser foot/presser foot. He presses the fabric layers together so that they can be transported together evenly.

In addition, the fabric is held tight so that the Stitch pattern is even. By the way, the sewing pressure also regulates that the fabric is not pulled down so that stitches are left out or the needle gets caught.

Interaction of presser foot and feed dog

The fabric is held by the presser foot and needle plate when the needle and thread penetrate. The feed dog goes down as the needle continues to penetrate.

The needle is pulled out of the fabric while the feed dog moves forward. The presser foot continues to press on the fabric.

The needle and feed dog move upwards to create the stitch. The presser foot continues to press the fabric onto the needle plate.

Presser foot and needle plate hold the fabric while the stitch is tightened. Then the feed dog shifts the fabric to the set stitch length.

What Are The Hosting Functionality?

cheap web hosting

How To Configure A Hosting Server

Configure a relational and tile cache data store with one of the connected GIS Server sites, and set that site as the hosting server for the ArcGIS Enterprise portal to allow members to perform the following tasks:

Publish hosted layers

Share layers and maps from ArcGIS Maps for Office

Map Viewer to add a zipped shapefile, CSV file or GPS Exchange Format file

Batch geocoding of addresses from a CSV file or table

Perform feature analysis in Map Viewer, Insights for ArcGIS, or ArcGIS Pro

Perform raster analysis through Map Viewer or ArcGIS Pro

License:

To specify a GIS Server site as hosting server, the site must be licensed as an ArcGIS GIS Server site in Standard or Advanced Edition. For more information, see what is ArcGIS GIS Server? You will find detailed information about licensing.

Configure Data Stores

Hosting servers must be able to store data for the hosted layers published in ArcGIS Enterprise. You must configure the hosting server at least for storing feature layer data.

You can either install ArcGIS Data Store and create a relational and tile cache data store registered with your GIS Server, or you can create an enterprise geodatabase and register it as a managed database of the GIS Server site, when users publish hosted feature layers to the portal, the data is copied to the data store that you registered.

Older Versions:

In version 10.5.1 and earlier, an enterprise geodatabase could be used as a managed database for a hosting server. In ArcGIS Enterprise 10.6 this is no longer supported. The managed database of a hosting server must be configured with ArcGIS Data Store as a relational and tile cache data store. An enterprise geodatabase can still be registered as an additional data store for an ArcGIS GIS Server site.

Using ArcGIS Data Store

ArcGIS Data Store is a separate installation provided with ArcGIS Enterprise that allows you to create and maintain the following hosted path data stores that youpublishto an ArcGIS Enterprise portal:

Relational Data Store: Stores the portal’s hosted feature layer data, including hosted feature layers that are created as output from spatial analysis tools that run in the portal.

Tile Cache Data Store: Stores caches for the hosted scene layers of your portal.

Spatiotemporal-type big data store: Archives real-time observation data that you can use with an ArcGIS server running the ArcGIS Geo Event server connected to your portal; also stores the results of ArcGIS Geo Analytics Server tools.

The GIS Server site hosting server must be configured with at least one relational and tiling cache data store. For instructions on installing the ArcGIS Data Store and creating a relational and tiling cache data store, see Overview of the ArcGIS Data Store Configuration and Related Topics.

The information under Apps and Functionality for which ArcGIS Data Store is required will help you determine what additional data store types you need.

Register A Managed Database

As mentioned previously, enterprise geodatabases are no longer supported as managed databases for hosting servers. For all reconfigured hosting servers, use a relational and tile cache data store of cheap web hosting.

Set The Hosting Server

Once one of the connected GIS Server sites has a relational and tile cache data store, you can register it as the portal’s hosting server.

Log in to the portal site as an administrator and navigate to Organization > Edit Settings > Server.

In the Hosting Server section of the page, click the drop-down list and select one of the GIS Server sites that you connected to the portal. If you have added multiple GIS Server sites to the portal, only one can be designated as a hosting Server.

For each service, items on the portal site for your portal organization appear on the Content page’s My Content tab.

The services that enable these items to appear in a folder named Hosted, which is listed when you log in to the GIS Server site through ArcGIS Server Manager.

You should now configure utility services for your portal if you have not already done so.

A Short Study About Disadvantages Of Fast Food

fast food
fast food

Disadvantages Of Fast Food

They chortle at us on every street corner, every motorway relaxation stop and each train station: speedy food chains and speedy meals restaurants. For a few euros you get your burgers, pizzas and fries right away. Each toddler is aware of that fast meals is something however wholesome however do why athletes have to preserve their hands off the “food to go”? Or that there are also advantageous aspects? Here you may discover the biggest speedy meals pros and cons to look at Restaurants Near Me.

High calorie speedy food makes you fats, it really is just a truth. A menu of a cheeseburger and a portion of fries with mayo, plus a coke … On common, humans absorb 1,000 – 1, 2 hundred calories according to meal in rapid food restaurants! For bodily less lively or children, this is easily half of the everyday calorie requirement.

Short saturation: despite the fact that burger and co. Have a number of energy, you get hungry soon after consuming. Why?! Quite definitely, fast meals includes almost no fiber, and the urge for food is stimulated by using the many synthetic additives and amounts of salt.

Dangerous food:

Of path, the operators of well-known fast meals chains want to make the biggest viable profit. If you’re paying a euro for a burger – are you significantly expecting it to be the exceptional meat fine and hand choose jerkies seriously, humans: the meals nice is more than questionable.

And below what conditions the animals grew up, I do no longer want to keep right here. And that ought to hobby now not handiest the environmentalists among however every person desires to be healthful and fit. Because: “you are what you eat” – in case you eat cheap meat now, you get lots of antibiotics or genetically modified soybeans, with which the animals had been handled or fed, into your body.

Deceptive Charges:

The charge appears cheap handiest at the beginning look. But once you matter, how lots you have to spend on a home-cooked meal and how much you pay to get complete from rapid meals … The end result speaks for itself.

Further, the food contained are nearly all Tran’s fatty acids – “terrible” fat, that are very unhealthy and promote sicknesses to the heart assault. And that many salts make you thirsty – of course, because you then purchase a 2nd, 0.33, fourth … Coke. Calorie and sugar surprise pure.

Habituation impact:

Speedy meals spoils the taste in the long run. Over the years, you get used to all the synthetic additives and herbal, clean meals not tastes excellent. The coolest: you could also reprogram your flavor buds with the aid of consistently wiping out rapid meals from your weight loss program for some weeks.

How To Know Exactly Features Of Best Orange Juicer?

orange juicer

Features Of The Best Juicer

Often, we will be asked: “Which is the best juicer.” Choosing a juicer is like choosing a dress. If you go swimming, you will wear a swimsuit. If you are going to a formal occasion, you will wear a tuxedo.

Choosing a juicer is almost the same. You must match the purpose of using the juicer with the juicer itself. There are several “types” of juicers available on the market today.

Some are better suited to certain requirements and others are better suited to others. There is no “perfect” juice extractor that can complete all the juice needs and squeeze the same quality fruit and vegetable juices.

Please carefully consider your needs before buying the orange juicer. This article is based on our experience and is as accurate as possible. If you have questions, please refer to the FAQ.

Before buying a juicer, you should ask yourself which of the most important needs are you, and which period will you make such a decision. Some of the factors you should consider are.

Easy to clean Noise Speed of juicing Warranty time Types of fruits and vegetables you will squeeze.

One of the reasons why there is no “perfect” juicer is that fruits and vegetables have very different characteristics.

Some effective juice extraction methods for one type of fruit and vegetable may not be suitable for another. Fruits, which have a soft cell wall, require relatively gentle extraction methods.

Apples, pears, watermelons, melons, and pineapples are some juices that can be peeled together with the fruit. Citrus fruits, such as oranges, grapefruits, and oranges, have a bitter rind.

Juices that are squeezed out of “whole” oranges are not drinkable because of bitterness, and they also contain removable chemicals. One solution is to remove the skin (which is the only part of the skin – often leaving the white “essential” part, because the nutrients are present in the white part).

The more common method is to use the “drill” type juicer or the citrus-type squeezer juicer to squeeze all the oranges.

I often recommend that you buy organic foods as much as possible, especially fruits that are juiced on belts.

On the other hand, vegetables contain fibers, and the “stronger” cell walls require stronger mechanical extraction than fruit.

Because of the weak acidity of the vegetables, it is recommended that the vegetable juice is consumed within 15 minutes after it has been prepared because the data show that the vegetable enzyme only half the activity of the fresh vegetable juice at 30 minutes after the extraction.

When Apple or carrot juice turns dark, it shows that it is oxidized

The canned and bottled fruit and vegetable juices sold at the stores are not freshly squeezed and therefore never oxidized.

At that time, because these juices have been heat-treated, biochemical enzymes have been killed. These biochemical enzymes are the main reason for using juicers to make fresh juice and benefit from it.

I will try my best to introduce some kinds of juicers currently sold on the market in terms of working methods, advantages and disadvantages.

Centrifugal Juicer

The centrifugal juicer design is the oldest juicer design. The juicer uses a frictional cutter head or a cutting dish, and a filter basket to the side wall to collect the marc in the machine. Friction at the bottom of the basket, and is rotated at high speed (3600 rpm/min).

When the fruits and vegetables are placed on the machine, they are pushed through the feeding port and the rotating cutter head. The fruits and vegetables are shredded and the juice flows out.

The filter basket also rotates at the same high speed, just like the dehydration process of a washing machine. The powerful force pushes the juice out of the vertical side wall of the basket and collects it in front of the machine while the dregs stay inside the machine.

In general, this type of juicer is in the production of 1 – 2 quarts must be cut down after the fruits and vegetables, and slag must be removed before continuing juice. This is not a machine that can juice continuously.

The two centrifugal juicers we sell are Omega 1000 and Omega 9000. Both machines use stainless steel baskets and ball bearing induction motors. Omega 1000 has a 10-year warranty and Omega 9000 has a 15-year warranty. This juicer is suitable for most fruits and vegetables.

Parts And Functions Of Drill Machines

drill machine

There are many types of drill machines, here we take a closer look at the handheld power drill.

It is a practical and versatile tool when it comes to drilling a hole in different materials. Be it wood, plastic or stone – the drill allows you to drill holes with different diameters and depths.

Casings

The externally visible part of the drill is the housing. It is usually made of plastic and is manufactured in half-shell construction.

On the housing are manufacturer information and usually a nameplate indicating the electrical power consumption, the number of revolutions, the operating voltage, and the protection class?

Many drills still have an extra handle that attaches to the housing. Such a drill is easy to hold with two hands.

Motor

The electric motor is the heart of every drill. It generates the necessary rotational movement of the drill. Most motors are operated with 220V AC voltage.

Gearbox

The high speed of the electric motor is not suitable for drilling, so by means of a gearbox, the high speed of the motor is translated into a lower speed of the drill.

In this case, a gear transmission is used, which is designed as a manual transmission. This makes it possible for at least 2 different gear ratios (“gears”) and sometimes even a “reverse gear”. This setting is made with the “gearshift”.

Chuck

This part of the drill is an attachment that picks up the drill and allows you to work with different drills by swapping them quickly. By the chuck key, the jaws can be moved inside the chuck and the drill can be fixed or loosened again.

Drill Bits

The drill (more precisely, the drilling tool) is the insert that is picked up by the drill chuck. Through the cutting edge at the top, he penetrates into the material. There are drills for various materials – for metal, stone, wood, and plastic. The drill with a conical head.

A special type of hand drill is the impact drill. Here, the (switchable) impact mechanism in addition to the rotational movement of the drill lifting movements at high frequency. These feel like a vibration during drilling and support the drilling of materials such as concrete or stone.

What Is The Difference Between Oil-Free And Oil-Lubricated Compressor

oil free compressor

Oil-free compressor vs. oil lubricated compressor

You are unsure whether an oil-free compressor or an oil-lubricated compressor is right for you? Depending on the requirements you place on your compressor, different models are possible.

When choosing the right device, it helps to ask yourself the following questions: Do you need a highly compressed air power, about 10 bar or 15 bar, or is a lower pressure sufficient?

Should the compressor be oil-free or is an oil-lubricated model better suited for your purposes?

Which type of compressor is more economical? Do you need the compressor as an endurance runner, that is, will it be in constant operation or is the compressor used at intervals?

In addition, the question arises as to whether the compressor is quiet must be (so-called quiet running compressors) or the sound insulation plays a minor role (e.g, when operating in a separate room).

Below you will find an overview of the advantages and disadvantages of oil-free compressors compared to oil-lubricated compressors, their applications, and quiet running compressors.

Oil-free compressors

In some purchasing decisions, the question of a comparison with the oil-lubricated air compressor is not. In certain applications, an oil-free compressor is essential or mandatory:

  • the oil-free compressor in the laboratory
  • Dental medicine
  • Spraying
  • Environmental Measurement
  • Food u. beverage industry
  • pharmaceutical industry
  • chemical industry
  • Electrical engineering

In addition, best quiet air compressor is more and more oil-free compressors are also used in areas where an oil-lubricated compressor could also be used. The main reasons for this are the low environmental impact and the minimal maintenance effort. The Airwin oil-free compressors we offer also have the advantage of being particularly quiet.

 Advantages and Disadvantages At A Glance

Oil-Free Compressor Advantages

  • minimal maintenance
  • clean, oil-free compressed air
  • no oil change / oil separation required
  • no oil filter replacement necessary
  • especially environmentally friendly
  • Treatment and disposal costs are eliminated

Oil Free Compressor Disadvantages

  • limited operating pressure up to 8 bar
  • high investment costs for equipment with a relatively high intake volume.

Oil Lubricated Compressors Advantages

  • higher operating pressure possible
  • simultaneous lubrication (eg important for compressed air tools)
  • long lifetime

Oil Lubricated Compressors Disadvantages

  • higher maintenance costs
  • Oil change & disposal of used oil required
  • Oil leaks can occur
  • Air / environmental pollution

Conclusion

An oil-free air compressor offers many advantages. The lower maintenance costs are not only reflected in the lack of purchase cost of compressor oil and air filter, but also include the amount of time an employee or a maintenance service has to do.

Oil level controls are eliminated, there is no hazardous waste (waste oil), and you can also save oil filter and oil separator.

For certain areas (see above), a compressed air compressor that operates without oil is also essential.

The compressed air containing trace amounts of oil can not be used in sensitive areas, e.g, in the production of food, medical and hygiene articles, in the laboratory and in research, or in the processing of paints and varnishes.

Oil-free compressors are  well-suited for

  • Paint processing,
  • Blowing with clean compressed air,
  • For airbrushing,
  • In the production and processing of food and beverages,
  • In laboratories,
  • In dentistry or dental technicians / dental laboratories,
  • In the dust removal,
  • In the field of production of electronic parts
  • In the pharmaceutical or chemical industry,
  • To prevent contamination with oil.

Another advantage is the lower volume of oil-free Air Win compressors over ordinary reciprocating compressors.

The oil lubricated compressor then the better choice if the required compressed air, or the speed could only be achieved with very expensive oil-free compressors and the oil for the lubrication of e.g, pneumatic tools is advantageous.

In addition, when investing in your compressed air system, remember that an oil lubricated compressor has a longer service life than a device without oil.

Advantages Of Cool Welding Helmets

cool welding helmet

LARGE VIEWABLE FIELD

Large field of view provides good visibility of the welding object and the environment. Adjustable sensor slide to change the detection angle from 120 ° to 60 °. Thus, a reaction of the welder cassette to light pulse from the environment can be prevented.

WSH II 9-13: Equipped with an additional sensor for even more sensitive reaction. Protection level fine adjustment between DIN 5-9 and DIN 9-13 (WSH II 5-13) or DIN 9-13 (WSH II 9-13) Controller to adjust the sensitivity to the environmental conditions and your own needs.

SWITCHING TIME

Opening delay to adjust the switching time from dark back to bright state. WSH II 9-13: Auto or manual mode in auto mode, the helmet automatically adapts the adaptation of the protection level to the respective arc intensity.

MANUAL MODE

In manual mode, the cool welding helmet remains in the set protection level. WSH II 5-13: Protection level setting DIN 5-9 or DIN 9-13 Abrasive mode for switching off the cassette for flicker-free grinding Interchangeable backup batteries for constant power supply to the consistent.

WSH II 9-13

The WSH II 9-13 is ideal for all applications with changing welding processes. This helmet allows a stepless adjustment between the protection levels 9 and 13 and is also equipped with an automatic mode, which individually adapts the protection level to the respective conditions.

Ergonomic helmet design with minimal strain on the neck muscles and comfortable headband with telescopic mechanism.

Special smoke-resistant design.

Rear-facing lens to prevent scratches.

Anti-glare cassette with lots of clever details.

Additional sensor so that the helmet responds even more sensitive.

Auto or manual mode for the automatic adaptation of the protection level or manual adjustment of the arc intensity

The WSH II 5-13 is the welding helmet for almost all welding processes.

The steeples adjustment between the protection levels 5 and 13 makes the helmet the perfect working tool for demanding welders with changing welding processes.

The Importance Of Happy Mother Day

happy mother day

Mother Day Quotes

Dear Mama, On this occassion of Happy Mothers Day, I owe my life to You, you have only ever given me the best, I’m holding you tight because I love you And thank God that you exist!  You have given me the life Have a big thank you, You are the best mom in the world, I wish you all the love for Mother’s Day! I wish you to Mother’s Day Health, happiness, and sunshine, I give you flowers and a kiss And send you a kind greeting! Dear Mum Today is your feast, You are the best and have a big heart, I brought flowers to you today And I wish you all the love for Mother’s Day! I cannot remember a long poem, And I wonder: What should I give you? I give you a kiss and hug you, You’re the best mom in the world! Dear mum, I love you very much, You are the best mum that ever exists, I wish you a long and happy life, May God give you only the best? Be happy, stay healthy and strong I send you my best wishes Mother’s Day!  Much love for Mother’s day!

Mother’s Day is a wonderful holiday in honor of mother and motherhood because the most important person in our lives is our dear mother: she gives birth to us, cares for us, loves and supports us all her life.

Mother’s Day is a nice family party. Even though we can make Mother’s Day every day and show our love and gratitude every day, it is still nice that we dedicate one day a year to our mother alone. It is also a wonderful occasion to spend more time with the family or to visit the mum.

Mother’s Day is always held on the second Sunday of May in German-speaking countries.

Gifts for Mother’s Day

On Mother’s Day we want to give our mom a treat, give her something nice and spoil her. The traditional Mother’s Day gifts are flowers, chocolates, and a nice card.

Usually, our mother can buy everything herself, so it’s usually small gestures and attention that give her the most pleasure. For example, on this day you can prepare breakfast for you, cook something special, bake a cake or organize a family outing. It is important that our gift is made with love and comes from the heart.

A personal gift, such as a homemade card, is very original and equally well received. Here you can find beautiful sayings and poems for Mother’s Day.